Welcome To b2b168.com, Join Free | Sign In
中文(简体) |
中文(繁體) |
Francés |Español |Deutsch |Pусский |
| No.13597198
- Product Categories
- Friendly Links
Information Name: | Shandong Axial Blower (Figure) _ _ Jiangsu axial fan axial fan |
Published: | 2014-11-07 |
Validity: | 0 |
Specifications: | Any |
Quantity: | |
Price Description: | |
Detailed Product Description: | Axial exhaust fan when using A-type transmission in the design, thermal insulation structure should be set up between the chassis and the motor. Speeding speed for maximum operating speed of 110% axial fans, speeding time to less than 2min. Followed by our technical staff to introduce the assembly requirements axial flow exhaust fan. 1. Axial Radial clearance values ??fire smoke ventilation casing and impeller should be uniform, unilateral radial clearance values: When the machine number ≤No.10, the gap value ≥3.5mm; machine number> No.10, gap ≥4.5mm. 2. Anti-smoke fan painted interior and exterior surfaces technical compliance JB / T 6886's. Fans paint chosen delivery 280 ℃ after fan media, paint almost no discoloration. 3. The inlet and radial impeller wheel cover unilateral import clearance should be uniform, unilateral radial clearance value should be within the range of 0.15% to 0.4% of the impeller diameter, inlet and impeller cover the axial length of the overlap should be impeller 0.8% to 1.2% of the diameter. After the above introduction, if you are using axial flow exhaust fan in the process, there is no place you do not understand, you can always contact us. FRP axial fan before installation needs to be done to prepare? 1, FRP axial fan blower should be carefully checked before installation if there is damage to the deformation of Beijing axial fans, if damaged, deformed Hengyang axial fans, after proper to be repaired before proceeding arrangements. 2, the installation should pay attention to check the connection part loose Suzhou axial fan blades and duct clearance should be uniform, not a collision. 3, the weight should not be connected to the outlet pipe borne by the fan duct, the installation should additional support. 4, in the FRP axial fan outlet side must be installed wind-collecting device, hope means safety net. 5, the fan base engaged with the ground plane must naturally not be forced to join the base beat, to prevent deformation of the base, the installation should stand corrected, plus horn pieces, keeping the horizontal position, and then tighten the bolt. 6. After installation, you must first be tested to be operating normally before allowing official use. Shandong Axial Blower (Figure) _ _ Jiangsu axial fan axial fan is provided by the Texas Cheung sail central air-conditioning parts plant. "Fans, dampers, air duct, aluminum outlet" preferred Texas Xiang sails central air conditioning parts plant (2), the company is located at: Teng Lu Wu County Dezhou Economic Development Zone, over the years, Xiang-fan air conditioning to provide customers with the most quality of service, Contact: Liu. Welcome to the new and old customers call, letter, visit the guide, business negotiations. Cheung sail conditioned expect to be your long term partner! |
Admin>>>
You are the 30529 visitor
Copyright © GuangDong ICP No. 10089450, Texas Cheung sail central air conditioning parts plant All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility
You are the 30529 visitor
Copyright © GuangDong ICP No. 10089450, Texas Cheung sail central air conditioning parts plant All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility